Decorative Hoop with dangling Pearl

Length

a little less than 1.5" (35 mm)

Materials

4 mm round Pearls

10 mm round Silver Decorative Wire
Silver colored wire

Geometric Square with Decorative Crystal

Supplies: 

2 - 13 x 11 mm square glass beads 

2 - 4 mm crystals  

2 - 1" 20 guage antique gold colored copper wire

2 - 2" 20 guage antique gold colored copper wire (for hooks)

2 - 2" 20 guage antique gold colored copper wire (for beads)

Tools
Basic Tool Kit

Ring Mandrel or Sharpie marker (to create round bend for hooks)

Duration
30 minutes

Length: 2"

The Idea

To create the hook, take the 2" wire and create a loop at one end. Wrap the wire around a cylindrical object, something like a permanent marker for the round bend. 

Take about a 1" length wire and with chain nose pliers, bend over about 1/16" wire over itself to create a headpin. Thread the glass bead through and close with a wire loop. Create loop on both ends of the crystals with the 1" gold wire. Attach wired crystal to hook and attach the end of the crystal to the wired glass bead. Create matching earring.

Geometric Square with Decorative Wire

 

Supplies: 

2- 13 x 11 mm square glass beads 

2 - 10 mm decorative connecting wire

2 - 2" 20 guage antique gold colored copper wire (for hooks)

2 - 2" 20 guage antique gold colored copper wire (for beads)

Tools
Basic Tool Kit

Ring Mandrel or Sharpie marker (to create round bend for hooks)

Duration
30 minutes

Length: 1 1/2"

The Idea

To create the hook, take the 2" wire and create a loop at one end. Wrap the wire around a cylindrical object, something like a permanent marker for the round bend. 

Take about a 1" length wire and with chain nose pliers, bend over about 1/16" wire over itself to create a headpin. Thread the glass bead through and close with a wire loop. Attach wired bead decorative wire and attach that to the hook. Create matching earring.

Geometric Square

 

Supplies: 

2- 13 x 11 mm clear square glass beads

2 - 2" 20 guage antique gold colored copper wire (for hooks)

2 - 2" 20 guage antique gold colored copper wire (for beads)

Tools
Basic Tool Kit

Ring Mandrel or Sharpie marker (to create round bend for hooks)

Duration
30 minutes

Length: 1 1/2"

The Idea

To create the hook, take the 2" wire and create a loop at one end. Wrap the wire around a cylindrical object, something like a permanent marker for the round bend. 

Take about a 1" length wire and with chain nose pliers, bend over about 1/16" wire over itself to create a headpin. Thread the glass bead through and close with a wire loop. Attach wired bead to hook. Create matching earring.

Decorative Hoop with Pearl

Length:  1.5" (37 mm)

Materials

5 mm red crystal beads

15 mm silver decorative hoops
Silver colored wire

Siam Ornament

Length

a little over 1.5" (44 mm)

Materials

10 mm red crystal beads

Gold colored wire

2 gold spacer beads

Scarlet Rain

Length

2.75" or 42 mm

Materials

Gold colored wire

18 x 11 mm Red Multi-colored glass bead

Violaceous

Length

2.25" or 55 mm

Materials

Gold colored wire

7 mm Purple Velvet Crystals

3 mm Violet Crystals

Cobblestone

Length: 2"

Supplies: 

2 - 8 mm round gold beads

4 - gold jump rings

2 - 4 mm gold spacer beads 

2 - 10 mm gold decorative wire links

2 - 2.5" 20 guage gold colored copper wire (for hooks)

2 - 3" 22 guage gold colored copper wire (for beads)

Tools
Basic Tool Kit

Ring Mandrel or Sharpie marker (to create round bend for hooks)

Duration
20 minutes

The Idea

To create the hook, take the 2" wire and create a loop at one end. Wrap the wire around a cylindrical object, something like a permanent marker for the round bend. 

With a gold wire, create simple loop and continue rolling over the wire. Use flat nose pliers to hold wire parallel while rolling wire. Make 2-3 loops, insert spacer bead, gold bead and close with a wire wrapped loop. Center wire hoop on either side of the bead. Attach jump ring to wired bead and decorative wire link. Attach another jump ring to the link and earring hook. Create matching earring.

Cradle Rock

Length: a little over 2"

 Supplies: 

2 - 8 mm pink cube bead

4 - 4 mm silver spacer beads beads

2 - 2" 22 guage silver colored copper wire (for hooks)

2 - 4" 22 guage silver colored copper wire (for beads)

Tools
Basic Tool Kit

Ring Mandrel or Sharpie marker (to create round bend for hooks)

Duration
  30 minutes

The Idea

To create the hook, take the 2" wire and create a loop at one end. Wrap the wire around a cylindrical object, something like a permanent marker for the round bend. 

Find the center of the wire and bend into right angle. Thread spacer bead, cube bead followed by another spacer bead. With flat nose pliers bend wire. Close wires with wrapped loops and create simple loop with other end of wire. Attach to hook. Create matching earring.

Red Revolution

Length: 2"

 Supplies: 

2 - 18 x 13 mm flat oval bead

2 - gold jump beads

2 - 3" 22 guage gold colored copper wire (for hooks)

2 - 4" 22 guage gold colored copper wire (for beads)

Tools
Basic Tool Kit

Ring Mandrel or Sharpie marker (to create round bend for hooks)

Duration
15 minutes

The Idea

To create the hook, take the 2" wire and create a loop at one end. Wrap the wire around a cylindrical object, something like a permanent marker for the round bend. 

With a gold wire, create simple loop and continue rolling over the wire. Use flat nose pliers to hold wire parallel while rolling wire. Make 2-3 loops, insert bead and close loop with same rolling technique. Center decorative wire on bead. Attach hook and gem with jump bead. Create matching earring.

Licorice Drops

Supplies: 

2 - 10 mm teardrop black crystal beads

2 - 3 mm silver spacer beads 

2 - 10 mm silver decorative wire

2 - 2" 20 guage silver colored copper wire (for hooks)

2 - 5" 20 guage silver colored copper wire (for beads)

Tools
Basic Tool Kit

Ring Mandrel or Sharpie marker (to create round bend for hooks)

Duration
30 minutes

Length: 2"

The Idea

To create the hook, take the 2" wire and create a loop at one end. Wrap the wire around a cylindrical object, something like a permanent marker for the round bend. 

Take the 5" silver wire and with chain nose pliers, bend over about 1/16" wire over itself and with the pliers hold the wire on its side and keep rolling to create the twirl for the bottom of the headpin. Thread spacer bead and crystal bead through wire. To create wire wrapping, start off closing bead with a wire wrapped loop. Instead of cutting wire, continue wrapping wire around the bead. To close, come back up to loop and wrap wire a couple of time. Cut the wire and press ends to prevent snags. Attach wired bead to jump ring and attach jump ring to decorative wire. Attache decorative wire to hook. Create matching earring.

Idea:

Try using a smaller guage wire to wrap beads for a different look.

Gold Coin

 

Supplies:
2 - 30 mm gold round decorative discs

2 - 10 mm gold round decorative discs

4 - seed beeds

2 - 3" 20 guage gold colored copper wire 

2 - 2" 20 guage gold colored copper wire (for hooks)

2 - jump rings

Tools
Basic Tool Kit

Ring Mandrel or Sharpie Marker (to create round bend for hooks)

Duration
30 minutes

Length: 3"

The Idea

To create the hook, take the 2" wire and create a loop at one end. Wrap the gold wire around a cylindrical object, something like a Sharpie marker for the round bend. 

Take the 3" gold wire and create a wire wrapped loop. Thread the smaller disc and two seed beeds through the same wire and close with another wire wrapped loop. Attach the jump beads to the larger discs. Connect all three components. Create matching earring.

Violet Iris

Supplies: 

2- 8 x 15 mm fancy silver charms

2 - 6 mm purple round beads

2 - silver jump rings

4 - 2" 20 guage silver colored copper wire (for hooks and beads)

Tools
Basic Tool Kit

Ring Mandrel or Sharpie marker (to create round bend for hooks)

Duration
15 minutes

Length: 1 3/4"

The Idea

To create the hook, take the 2" wire and create a loop at one end. Wrap the wire around a cylindrical object, something like a permanent marker for the round bend. 

With silver wire, create simple loop and thread purple bead and close with simple loop. Attach charm and wired purple bead to jump ring. Attach the other end of the purple bead to a hook. Create matching earring.

Blushing Iris

Supplies: 

2- 8 x 15 mm fancy silver charms

2 - 10 mm pink round beads

4 - silver spacer beads

2 - silver jump rings

4 - 2" 20 guage silver colored copper wire (for hooks and beads)

Tools
Basic Tool Kit

Ring Mandrel or Sharpie marker (to create round bend for hooks)

Duration
15 minutes

Length: 2"

The Idea

To create the hook, take the 2" wire and create a loop at one end. Wrap the wire around a cylindrical object, something like a permanent marker for the round bend. 

With silver wire, create simple loop and thread spacer bead, pink bead, another spacer bead and close with simple loop. Attach charm and wired pink bead to jump ring. Attach the other end of the pink bead to a hook. Create matching earring.

Cluster of Pearls

 

Supplies:
14 - 5 mm round pearls

14 - 1" 20 guage silver colored copper wire (for beads)

2 - 3" 20 guage silver colored copper wire (for hooks)

Tools
Basic Tool Kit

Ring Mandrel

Duration
30 minutes

Length: 1 1/2"

The Idea

To create the hook, take the 3" wire and create a wire wrapped loop at one end. Wrap the wire around a cylindrical object, something like a permanent marker for the round bend. 

Take about a 1" length of silver wire and with chain nose pliers, bend over about 1/16" wire over itself to create a headpin. Thread the pearl beads through and create wire loop. Do this to the remaining beads. Attach 7 pearls to each of the hooks.

 

Idea:

Try other beads for a different effect.